User Tools

Site Tools


Product Index

Victoria 3 and Michael 3 Skeletons

Click for original

Product Name: Victoria 3 and Michael 3 Skeletons
Product ID: 3333
Published Artist(s): Daz Originals
Created By: N/A
Release Date: 2005-05-12

Product Information

  • Required Products: None

Make no bones about it - this is the skeleton you've been waiting for: an anatomically correct skeleton designed to work with Michael 3 and Victoria 3 for unparalleled accuracy and poseability.

Product Notes

  • You can find new icons for loading this product in the following Poser Libraries:
    • Figures: “DAZ Skeleton”
    • Pose: “!DAZ's Skeleton”
  • You can find new icons for this product in the following DAZ Studio Categories:
    • “Anatomy:Internal”
    • “Figures:Creatures:Land”
    • “Materials:Anatomy”
    • “Materials:Feminine:Victoria 3 Skeleton”
    • “Materials:Masculine:Michael 3 Skeleton”
    • “Poses:By Region:Full Body”
    • “Poses:Other:Reset”
    • “Utilities:Visibility”
  • Important:
  • In Poser, Use Limits must be checked (Figure: Use Limits) for the skeleton (and M3/V3 if they're used with the skeleton). As with most figures, as long as limits are retained, everything should bend properly. If Use Limits is not checked, there may be issues with bones sticking out, so it's very important that this is applied.
  • When using the skeleton inside M3 or V3, certain poses may cause the skeleton to pop out or V3/M3 to deform oddly depending on which way the figures are conformed. (P4/PP has the skeleton conformed to M3/V3 while it's the other way around in other programs.) If that happens, simply select the conformed figure and apply the Zero Figure pose to the conformed figure (in the !DAZ Skeleton pose folder) and it will snap back into place.
  • Using standalone skeletons or posing M3 and V3 with a skeleton conformed to either in Poser, the shin and forearm bones will not function properly until you turn off IK. If necessary, use the IK until you accomplish the pose you are attempting, then turn it off and the bones will snap into their correct positions.
  • There are rotational dials in the clavicle and scapula to help eliminate poke-through in extreme poses.
  • The toes have extra posing ability so it may be necessary to tweak the toe bones to fit inside M3 or V3 when using a few poses because M3 and V3 do not have the same level of toe flexibility.
  • Current Walk Designer files made for M3 or V3 may not work well with the skeleton. It may be necessary to create new WD files for the skeletons.
  • Helpers:
    • The red helper objects (the hexagonal halos surrounding strategic areas of the skeletons) represent groups on the skeletons that do exist in the figure files but have no geometry beyond the helper objects' geometry. These have been added to make the posing process possible within the confines of the viewport. (I.e. it allows the skeletons to be compatible with Millennium 3 figure poses while remaining anatomically correct.) These helpers also have their own material grouping to make them easily transparent and non-renderable. (Please see the MAT Pose Instructions below.)
  • Bones and Body Parts:
    • Some of the bones in the skeleton can be selected but can not be manipulated, such as many of the vertebrae, the tibias, etc. This allows you to see the names of the bones while keeping the skeleton posable within Poser and D|S.
  • Morphs:
    • The skeleton skulls have several morphs to make them Mimic ready and to keep them as compatible as possible with the M3 and V3 figures. (This is why there are morphs such as Open Lips and Open Lips2 even though the skeleton itself doesn't have lips.)
  • Poser 4 and Pro Pack Use Instructions:
    • When conforming skeletons to Michael or Victoria in Poser 4 and Pro Pack, use the P4 Conform versions to conform to them. Also, there should be no need to pose the skeleton once it is conformed to M3 or V3. The skeletons are designed to follow them with no poke through in most cases, with the exception of a few of the more extreme poses.
  • Poser 5+ Use Instructions:
    • When placing the skeletons inside M3/M3 in Poser 5 or Poser 6, you must load the stand-alone skeleton into the scene first, then Michael or Victoria, and then conform Michael and Victoria to the stand-alone skeletons and pose the skeleton. It is necessary to use the Zero Figure pose on M3/V3 for the skeletons to function correctly. This is located in your !DAZ Skeleton pose folder. Also, make sure to disable IK on M3 and V3 before conforming them.
  • DAZ Studio Use Instructions:
    • When placing the skeletons inside M3/V3 in DAZ Studio, conform M3 and V3 to the standalone skeletons and pose the skeleton. Make sure to then select M3 or V3 in the Parameters window and zero M3/V3's joint rotations by clicking Ctrl+Shift+F for this to function correctly. After zeroing the rotations, please use the Zero Figure pose on M3 or V3. (This is located in your !DAZ Skeleton pose folder.) At this point, the figure will fit the skeleton properly. Select the skeleton and pose it.
  • Note: a few extreme poses might not work well in D|S due to the way the poses are constructed. The D|S team is aware of the issue and is working on incorporating a fix to accommodate those types of poses for the skeleton in a future build of D|S.
  • MAT Pose Instructions:
    • There are several material poses located in the !DAZ Skeletons folder along with the zero figure pose. There are four texture map poses (two for P4 and two for PP), the default materials pose and all materials white pose, four varying degrees of figure opacity for Victoria and Michael (full, 75%, 50% and 25%), and two poses for helper opacity (opaque and transparent). The Transparent Helpers pose makes the helpers non-renderable.
  • This product includes:

Resolved Issues

  • 2013-05-14 - 1.2 – Added textures, updated Metadata.

Known Issues

  • None


Visit our site for technical support questions or concerns.