User Tools

Site Tools


zz* - Lorenzo Lorez

zz* = This page is a WIP. There is likely to be incomplete and or missing information while the page is being built. If this product has a ReadMe in the Old ArtZone Wiki section of the site, it will be located here: 12076.

Click for original

Product Name: Lorenzo Lorez
Product ID: 12076
Published Artist(s): Predatron
Created By: N/A
Release Date: 2011-02-26

Product Information

  • Required Products: None

Here he is the Ultimate Low Resolution Male, Lorenzo Lorez! Now you can populate your scenes with many of these figures and not worry about the hit on your computer resources.

This comprehensive package comes with not just one figure, but 4, plus 2 more partial figures. The base figure is ready for any custom second skin textures or conforming clothes (not included in this set), and is only 5109 polygons. Fully loaded with 230+ morphs, to change body types from heavy to thin, muscular to young, orc to goblin and elf to halfling, plus many more. Also the head morphs have many options to change to look of eyes, nose, ears, mouth, nose, cheeks and chin, also there are 50 Face types giving many options to create unique crowds.

The remaining 3 full figures come fully clothed as a Business Suit, Hoodie and T-Shirt. Each include all the same morphs as the base figure with a few extra ones for adjusting the clothing. The polygon count for all 4 figures range from just over 5000 to just under 5500.

The other great feature of this set is the sheer amount of textures that are available, giving you even further opportunites to generate large numbers of characters all with different appearances. Firstly each figure uses the same skin textures and these come in several ethinc varations, Caucasian, Latino, Indian, African and Oriental. Each of the ethnic skin types are further enhanced by the addition of hair, beard, goatee, moustache and bald head. The Caucasian version has several hair colour options, Black, Brown, Blond, Grey and Red. So in total there are 122 MATs, but that's not all, included are 8 bonus creature skin textures, Alien, Goblin, Orc and 5 Zombie textures. There are corresponding morphs for each creature texture.

There are 94 Clothing MATs, these will affect the busineess suit, shirt, tie and trousers, the t-shirt, sleeves and jeans, the hoodie, sleeves and jeans. There are two shoes textures, 2 walking boot textures and 5 trainer textures, all can be used with the 3 clothed versions. It is possible to swap around some of the clothing textures, as the business suit trousers and jeans textures are interchangeable, the t-shirt textures also work with the t-shirt included on the hoodie figure.

Each figure comes with a blank alternative so that all the morphs can be injected if needed, thus saving on resources further if morphs are not needed.

The partial figures are two variations of just head and hands, one with IK and one without. These are included for future use if they are needed for conforming clothing. It maybe possible to conform these figures to the clothing or vice versa depending on what is needed.

There are 3 smart props, a baseball cap with 5 texture options, a briefcase with 2 texture options and a pair sunglasses with 7 texture options. The sunglasses has one morph to change the lense shape.

Lastly there are 28 poses available and 8 hand poses.

Product Notes

Installation Packages

Below is a list of the installation package types provided by this product. The name of each package contains a Package Qualifier (WIP), which is used as a key to indicate something about the contents of that package.

  • 1 Core 1)

[ ] = Optional, depending on target application(s)

Not all installation packages provide files that are displayed to the user within the interface of an application. The packages listed below, do. The application(s), and the location(s) within each application, are shown below.

Lorenzo Lorez (Core)

  • You can find new icons for loading this product in the following Poser Libraries:
    • Figures: “P3DA_LorenzoLorez”
    • Hands: “P3DA_LorenzoLorez”
    • Pose: “P3DA_LorenzoLorez:INJ-REM_FILES”
    • Pose: “P3DA_LorenzoLorez:MATS_CLOTHES”
    • Pose: “P3DA_LorenzoLorez:MATS_SKIN:African”
    • Pose: “P3DA_LorenzoLorez:MATS_SKIN:Caucasian”
    • Pose: “P3DA_LorenzoLorez:MATS_SKIN:Creature”
    • Pose: “P3DA_LorenzoLorez:MATS_SKIN:Eyes”
    • Pose: “P3DA_LorenzoLorez:MATS_SKIN:Indian”
    • Pose: “P3DA_LorenzoLorez:MATS_SKIN:Latino”
    • Pose: “P3DA_LorenzoLorez:MATS_SKIN:Oriental”
    • Pose: “P3DA_LorenzoLorez:POSES”
    • Pose: “P3DA_LorenzoLorez:POSES:LorettaLorenzo”
    • Pose: “P3DA_LorenzoLorez:PROPS”
    • Props: “P3DA_LorenzoLorez”
  • You can find new icons for this product in the following DAZ Studio Categories:
    • “Accessories:Head”
    • “Accessories:Head:Eyes”
    • “Materials:Accessories”
    • “Materials:Eyes”
    • “Materials:Masculine:Lorenzo Lorez:Eyes”
    • “Materials:Masculine:Lorenzo Lorez:Skin:African”
    • “Materials:Masculine:Lorenzo Lorez:Skin:Caucasian”
    • “Materials:Masculine:Lorenzo Lorez:Skin:Creature”
    • “Materials:Masculine:Lorenzo Lorez:Skin:Indian”
    • “Materials:Masculine:Lorenzo Lorez:Skin:Latino”
    • “Materials:Masculine:Lorenzo Lorez:Skin:Oriental”
    • “Materials:Props”
    • “Materials:Wardrobe”
    • “People:Male”
    • “Poses:By Function:Grasp”
    • “Poses:By Function:Laying”
    • “Poses:By Function:Romance”
    • “Poses:By Function:Running”
    • “Poses:By Function:Sitting”
    • “Poses:By Function:Standing”
    • “Poses:By Function:Walking”
    • “Poses:By Region:Full Body”
    • “Poses:By Region:Partial Body:Hands”
    • “Poses:Other”
    • “Poses:Other:Reset”
    • “Props:Personal”
    • “Shaping:Inject”
    • “Shaping:Remove”

Additional Details

  • This is a low resolution figure set, each figure included has a fraction of the polygons found in most high resolution figures. As a result over posing may make some joints seem to appear crunched up a little, this is to be expected.
  • The main intention of this set is for use as a background figure.
  • Included are two partial figures of head and heads only, one with IK and the other without. These are included as a way of conforming to any existing third party clothing or any future developed clothing. There maybe two ways these can be used. Firstly the head and hands are conformed to the clothing figure. Or secondly the clothing figure is conformed to the head and hands. If the first option is chosen then it is suggested you use the non IK version, and with second option either version should work OK. You may then control the pose via the trans dials. At the time of release of this set, the Head and Hands figures are primarily available for future clothing developments.
  • When applying any scaling morphs/controls you will need to turn off IK first. There is a setting included for turning on/off IK in the Pose folder, or just use the menu in Poser or DAZ Studio. Once your scaled morph has been applied you may if you wish turn IK back on. Such morphs are the Dwarf, Halfling and Toddler.

Resolved Issues

  • None

Known Issues

  • None

Support

Visit our site for technical support questions or concerns.

1)
The contents of this package are in DAZ Studio Native and Poser Native formats